SiS001! Board - [第一会所关闭注册]

标题: [求助] DVD刻录机刻DVD老是出现校准电源错误 [打印本页]

作者: yndlsys 时间: 2008-4-6 13:34 标题: DVD刻录机刻DVD老是出现校准电源错误

各位大侠：
   小子这相有礼了，我有个问题想向各位大侠请教，希望各位大侠能鼎力相助，谢谢了！
   我的DVD刻录机是SONY DW-G120A 的，买了一年多了，没有怎么用，加起来总共刻了不到十张碟，现在刻DVD时，老是出现校准电源错误，不能刻了。但刻CD能刻，还有我买了一张SONY4X的可擦写的DVD盘能刻。是什么原因啊？如何解决啊？
      现俯错误报告如下：

4K22-0027-1105-E895-5062-CA0C-****
8K24-6229-0105-7CE0-502X-M7K1-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1
(Nero Express)
Recorder:          <SONY DVD RW DW-G120A> Version: MYR3 - HA 1 TA 0 - 8.3.2.1
Adapter driver:    <IDE>                   HA 1
Drive buffer  :    2048kB
Bus Type    :    default
CD-ROM:             <SONY    DVD RW DW-G120A >Version: MYR3 - HA 1 TA 0 - 8.3.2.1
Adapter driver:    <IDE>                   HA 1

=== Scsi-Device-Map ===
CdRomPeripheral    : SONY DVD RW DW-G120A          atapi Port 0 ID 0  DMA: Off
DiskPeripheral    : SAMSUNG HD160JJ                atapi Port 1 ID 1  DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DW-G120A    H: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE          : 0
Physical memory    : 511MB (523632kB)
Free physical memory: 245MB (251160kB)
Memory in use    : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.4.2008
UDF/ISO编辑
19:58:51 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

19:58:52 #2 Phase 112 File dlgbrnst.cpp, Line 1767
DVD-Video files reallocation started

19:58:52 #3 Phase 114 File dlgbrnst.cpp, Line 1767
DVD-Video files reallocation completed (no file modified)

19:58:52 #4 Text 0 File Isodoc.cpp, Line 6713
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate             : FALSE
Write                : TRUE
Finalize CD          : TRUE
Multisession          : FALSE
Burning mode          : DAO
Mode                   : 1
UDF Mode             : UDF/ISO bridge
UDF Options          : automatic
UDF Revision          : 1.02
UDF Partition Type    : physical
ISO Level             : 1 (Max. of 11 = 8 + 3 char)
Character set          : ISO 9660
Joliet                : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path  : FALSE
Write ISO9660 ;1 file extensions       : TRUE

19:58:52 #5 Phase 111 File dlgbrnst.cpp, Line 1767
DVD-Video files sorted

19:58:52 #6 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

19:58:52 #7 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

19:58:52 #8 Text 0 File Burncd.cpp, Line 3568
Turn on Disc-At-Once, using DVD media

19:58:52 #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

19:58:52 #10 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

19:58:52 #11 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

19:58:52 #12 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media:  2298495 (510:46.45, 4489MB)
Last address to be written:          2075983 (461:19.58, 4054MB)

19:58:52 #13 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

19:58:52 #14 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: SONY DVD RW DW-G120A, Media type: DVD-R
   Disc Manufacturer ID: <TYG02> <>
   Disc Application Code: 64, Disc Physical Code: 193

19:58:52 #15 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================

19:58:52 #16 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
   0: TRM_DATA_MODE1 ()
      2 indices, index0 (150) not provided
      original disc pos #0 + 2075984 (2075984) = #2075984/461:19.59
      relocatable, disc pos for caching/writing not required/ required
      -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2075984 blocks [H: SONY DVD RW DW-G120A]
--------------------------------------------------------------

19:58:52 #17 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [H: SONY DVD RW DW-G120A] for write in CUE-sheet-DAO
DAO infos:
==========
   MCN: ""
   TOCType: 0x00; Session Closed, disc fixated
   Tracks 1 to 1:                               Idx 0       Idx 1    Next Trk
   1: TRM_DATA_MODE1, 2048/0x00, FilePos          0          0 4251615232, ISRC ""
DAO layout:
===========
   ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
         0 |  lead-in | 0 | 0x41 |       0 |       0 | 0x00
         0 |       1 | 0 | 0x41 |       0 |       0 | 0x00
         0 |       1 | 1 | 0x41 |  2075984 |       0 | 0x00
   2075984 | lead-out | 1 | 0x41 |       0 |       0 | 0x00

19:59:00 #18 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

19:59:00 #19 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

19:59:00 #20 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

19:59:00 #21 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

19:59:00 #22 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

19:59:00 #23 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (5,540 KB/s)

19:59:00 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:59:00 #25 Text 0 File DVDR.cpp, Line 3280
Recording mode: Sequential Recording Mode

19:59:00 #26 Text 0 File DVDR.cpp, Line 3434
Start write address at LBA 0
DVD high compatibility mode: Yes

19:59:00 #27 Text 0 File Cdrdrv.cpp, Line 10164
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
   Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
   Disc Size: 120 mm,    Maximum Transfer Rate: <not specified> (F h)
   Number of Layers: 1, Track Path: Parallel Track Path (PTP),  Layer Type: recordable
   Linear Density:       0,267 um/bit,  Track Density:  0,74 um/track
   Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
   Outer Limit of Data Recordable Area:       26127F h
   Data in Burst Cutting Area (BCA) does not exist
   Revision number of maximum recording speed: -
   Revision number of minimum recording speed: -
   Revision number table of recording speed: - - - - - - -
   Class: 0,  Extended part version: 0
   Start PSN of the Extra Border Zone: 0 h
   Start PSN of Physical format information blocks in Extra Border Zone: 0 h
   Media Specific [16..783]:
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      15 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      01 40 C1 FD 9E D8 52 00 - 02 85 0D 10 88 9A 80 00 [email].@....R[/email].........
      03 4D 43 43 20 30 32 00 - 04 52 47 32 30 20 20 00 .MCC.02..RG20...
      05 88 80 00 00 00 02 00 - 06 09 0D 13 87 78 80 00 .............x..
      07 88 80 00 00 00 00 00 - 08 05 15 0D 10 0B 0A 00 ................
      09 98 08 0F 0B 78 88 00 - 0A 80 00 00 00 00 10 00 .....x..........
      0B 07 19 15 A7 88 75 00 - 0C 99 BC AA A2 20 22 00 ......u.......".
      0D 00 00 D0 00 00 00 00 - 0E 09 25 33 2F 29 1E 00 ..........%3/)..
      0F 50 21 2D 1F 9A B6 00 - 10 88 84 00 04 00 04 00 .P!-............
      11 00 00 00 00 00 00 00 - 12 09 2F 37 2F 29 1E 00 ........../7/)..
      13 50 1F 2D 1F 9A B6 00 - 14 88 C4 00 04 00 04 00 .P.-............
      15 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:59:00 #28 Text 0 File DVDR.cpp, Line 3572
Reserved Track size: 2075984 (1FAD50h, 4054MB) -> return code 0

19:59:00 #29 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400

20:00:08 #30 SPTI -1106 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key:  0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x0a860040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

20:00:08 #31 CDR -1106 File Writer.cpp, Line 306
Power calibration error
H: SONY DVD RW DW-G120A

20:00:08 #32 Text 0 File DVDR.cpp, Line 3840
EndDAO: Last written address was -1 (FFFFFFFFh)

20:00:08 #33 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 4x (5,540 KB/s)

20:00:08 #34 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

20:00:10 #35 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed

20:00:10 #36 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

作者: yndlsys 时间: 2008-4-6 13:42 标题: 对不起啊，打错一个字：是校准电压错误，不是校准电源错误

对不起啊，打错一个字：是校准电压错误，不是校准电源错误，希望各位大侠能帮帮我，谢谢了啊

作者: jybaa 时间: 2008-4-6 14:47

有可能是光盘和刻录机不怎么兼容，建议买好点的光盘试试！

作者: rdh6442sky 时间: 2008-4-6 17:30

碟片问题：使用反射率高的优质名牌碟片，比如先锋的Pioneer、威宝、三菱、TDK等，这些都可以。
光头问题：也有可能是光头上附着污物、光头机械系统不稳，控制光头电路不正常等。
温度问题：DVD记录机长时间高温烧刻，非常伤光头，光头甚至会被炼变形。
顺便降低一下刻不速度。
以上如果还不行，如果在保的话应该去调换，如果过保还是当DVD用吧或在换个刻录机。

作者: yishiqingyuan 时间: 2008-4-7 21:25

应该是光碟的事我也遇到过永好一点的就行

作者: nintendo 时间: 2008-4-7 23:31

1：换个光区看下
2：看接触有问题没有
3：重装系统
4：你的光区报销了

欢迎光临 SiS001! Board - [第一会所关闭注册] (http://67.220.92.23/luntan/)